Coralife Bio Cube Instrucciones de operaciones descargar pdf (Pagina 19)

Outside Hood Wiring for LED Strings to V+ and V-

Now that the LEDs are connected to the LED strings, we have to attach the drivers to those wires

to get power to the LEDs. The wires were attached according to the table above. If you have a constant

current kit, ensure you connect the LPC-60-1050 to the white LEDs and the LPC-35-700 to the blue LEDs.

If you haven’t already, strip the outside jacket off of both wires and then use a wire nut to

connect them together. An example is below, but the colors differ.

Using a wire nut, connect V+ from the driver to a blue (or red) wire coming from your hood and

connect V- from the same driver to the corresponding wire according to our table, in this case it should

be connected to the white wire from our hood.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Sin comentarios

Coralife Bio Cube Instrucciones de operaciones Pagina 19